Đánh giá chủ đề:
  • 0 Vote(s) - Trung bình 0
  • 1
  • 2
  • 3
  • 4
  • 5
LỖI KHÔNG SỬ DỤNG ĐƯỢC LỆNH KCS
#1
LỖI KHÔNG SỬ DỤNG ĐƯỢC LỆNH NÀO CỦA PHẦN MỀM KETCAUSOFT
EM ĐÃ FIX THEO LỖI SỬA ACAD TRONG Ổ C: NHƯNG KHÔNG ĐƯỢC.
MONG ANH HÙNG VÀ MỌI NGƯỜI CHỈ BẢO. XIN CẢM ƠN!


Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS_Plotter/KCS_Plotter_GstarCAD.dll
Cannot load assembly. Error details: System.IO.FileNotFoundException: Could not
load file or assembly
'file:///C:KetcauSoftKCS_PlotterKCS_Plotter_GstarCAD.dll' or one of its
dependencies. The system cannot find the file specified.
File name: 'file:///C:KetcauSoftKCS_PlotterKCS_Plotter_GstarCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS_SFD/KCS Spread Foundation
Detailing GstarCAD.dll Cannot load assembly. Error details:
System.IO.FileNotFoundException: Could not load file or assembly
'file:///C:KetcauSoftKCS_SFDKCS Spread Foundation Detailing GstarCAD.dll' or
one of its dependencies. The system cannot find the file specified.
File name: 'file:///C:KetcauSoftKCS_SFDKCS Spread Foundation Detailing
GstarCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS_STK/KCS STK Net GstarCAD.dll
Cannot load assembly. Error details: System.IO.FileNotFoundException: Could not
load file or assembly 'file:///C:KetcauSoftKCS_STKKCS STK Net GstarCAD.dll'
or one of its dependencies. The system cannot find the file specified.
File name: 'file:///C:KetcauSoftKCS_STKKCS STK Net GstarCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/PT Section/PT Section Net
GstarCAD.dll Cannot load assembly. Error details:
System.IO.FileNotFoundException: Could not load file or assembly
'file:///C:KetcauSoftPT SectionPT Section Net GstarCAD.dll' or one of its
dependencies. The system cannot find the file specified.
File name: 'file:///C:KetcauSoftPT SectionPT Section Net GstarCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS IFDe/KCS IFDe GstarCAD.dll Cannot
load assembly. Error details: System.IO.FileNotFoundException: Could not load
file or assembly 'file:///C:KetcauSoftKCS IFDeKCS IFDe GstarCAD.dll' or one
of its dependencies. The system cannot find the file specified.
File name: 'file:///C:KetcauSoftKCS IFDeKCS IFDe GstarCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/PFDe/Pile Foundation Detailing
ZWCAD.dll Cannot load assembly. Error details: System.BadImageFormatException:
Could not load file or assembly 'file:///C:KetcauSoftPFDePile Foundation
Detailing ZWCAD.dll' or one of its dependencies. This assembly is built by a
runtime newer than the currently loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftPFDePile Foundation Detailing ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/RCB/RCB Net ZWCAD.dll Cannot load
assembly. Error details: System.BadImageFormatException: Could not load file or
assembly 'file:///C:KetcauSoftRCBRCB Net ZWCAD.dll' or one of its
dependencies. This assembly is built by a runtime newer than the currently
loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftRCBRCB Net ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/RCS/Reinforced Concrete Slab
ZWCAD.dll Cannot load assembly. Error details: System.BadImageFormatException:
Could not load file or assembly 'file:///C:KetcauSoftRCSReinforced Concrete
Slab ZWCAD.dll' or one of its dependencies. This assembly is built by a runtime
newer than the currently loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftRCSReinforced Concrete Slab ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/RCCd/RCCd Net ZWCAD.dll Cannot load
assembly. Error details: System.BadImageFormatException: Could not load file or
assembly 'file:///C:KetcauSoftRCCdRCCd Net ZWCAD.dll' or one of its
dependencies. This assembly is built by a runtime newer than the currently
loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftRCCdRCCd Net ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/CTK/CTK_NET_ZWCAD.dll Cannot load
assembly. Error details: System.BadImageFormatException: Could not load file or
assembly 'file:///C:KetcauSoftCTKCTK_NET_ZWCAD.dll' or one of its
dependencies. This assembly is built by a runtime newer than the currently
loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftCTKCTK_NET_ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/QuickDraw/Quick Draw ZWCAD.dll Cannot
load assembly. Error details: System.BadImageFormatException: Could not load
file or assembly 'file:///C:KetcauSoftQuickDrawQuick Draw ZWCAD.dll' or one
of its dependencies. This assembly is built by a runtime newer than the
currently loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftQuickDrawQuick Draw ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS_LAT/KCS LAT ZWCAD.dll Cannot load
assembly. Error details: System.BadImageFormatException: Could not load file or
assembly 'file:///C:KetcauSoftKCS_LATKCS LAT ZWCAD.dll' or one of its
dependencies. This assembly is built by a runtime newer than the currently
loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftKCS_LATKCS LAT ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS_Plotter/KCS_Plotter_ZWCAD.dll
Cannot load assembly. Error details: System.BadImageFormatException: Could not
load file or assembly 'file:///C:KetcauSoftKCS_PlotterKCS_Plotter_ZWCAD.dll'
or one of its dependencies. This assembly is built by a runtime newer than the
currently loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftKCS_PlotterKCS_Plotter_ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS_SFD/KCS Spread Foundation
Detailing ZWCAD.dll Cannot load assembly. Error details:
System.BadImageFormatException: Could not load file or assembly
'file:///C:KetcauSoftKCS_SFDKCS Spread Foundation Detailing ZWCAD.dll' or
one of its dependencies. This assembly is built by a runtime newer than the
currently loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftKCS_SFDKCS Spread Foundation Detailing
ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS_STK/KCS STK Net ZWCAD.dll Cannot
load assembly. Error details: System.BadImageFormatException: Could not load
file or assembly 'file:///C:KetcauSoftKCS_STKKCS STK Net ZWCAD.dll' or one
of its dependencies. This assembly is built by a runtime newer than the
currently loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftKCS_STKKCS STK Net ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/PT Section/PT Section Net ZWCAD.dll
Cannot load assembly. Error details: System.BadImageFormatException: Could not
load file or assembly 'file:///C:KetcauSoftPT SectionPT Section Net
ZWCAD.dll' or one of its dependencies. This assembly is built by a runtime
newer than the currently loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftPT SectionPT Section Net ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
netload Assembly file name: C:/KetcauSoft/KCS IFDe/KCS IFDe ZWCAD.dll Cannot
load assembly. Error details: System.BadImageFormatException: Could not load
file or assembly 'file:///C:KetcauSoftKCS IFDeKCS IFDe ZWCAD.dll' or one of
its dependencies. This assembly is built by a runtime newer than the currently
loaded runtime and cannot be loaded.
File name: 'file:///C:KetcauSoftKCS IFDeKCS IFDe ZWCAD.dll'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase,
Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark,
Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef,
Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Autodesk.AutoCAD.Runtime.ExtensionLoader.Load(String fileName)
at loadmgd()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure
logging.
To turn this feature off, remove the registry value
[HKLMSoftwareMicrosoftFusion!EnableLog].
Loaded... Start command with [CBig GrinM].
Sap xep dim, SD - free lisp from www.cadviet.comType "DG" to startApplication
ERROR: Invalid type sent as command input
Command: (command "rccdraw") rccdraw Unknown command "RCCDRAW". Press F1 for
help.
Command: nil
Trả lời
#2
(07-04-2019, 04:28 AM)ducmanh169 Đã viết: LỖI KHÔNG SỬ DỤNG ĐƯỢC LỆNH NÀO CỦA PHẦN MỀM KETCAUSOFT
EM ĐÃ FIX THEO LỖI SỬA ACAD TRONG Ổ C: NHƯNG KHÔNG ĐƯỢC.
MONG ANH HÙNG VÀ MỌI NGƯỜI CHỈ BẢO. XIN CẢM ƠN!
anh cài đặt lại thử phần mền ketcausoft lại xem được không anh.
Trả lời
#3
CẢM ƠN ĐỘI NGŨ KETCAUSOFT NHÉ!
MÌNH CÀI LẠI BỘ PHẦN MỀM LÀ ĐƯỢC RỒI
Trả lời


Đi tới chuyên mục:


Thành viên đang xem chủ đề: 1 Khách